Application of filter press in starch production process
By JinbangtaiStarch residue is a good feed raw material, but the starch residue after potato starch extraction is wet (wet mechanism starch production process), so it must be dehydrated and dried by equipment to become coarse feed or feed raw material....
You Bang teaches you how to distinguish the advantages and d
By JinbangtaiAfter the filter press has been used for a certain period of time, not only the filter cloth but also the filter plate needs to be replaced, because the filter plate is also easy to deform or damage after long-term use and wear. Then, when...
Influence of rainy season on filter press and precautions
By JinbangtaiAny kind of object will be changed by the change of environment, so is the filter press. Most of the filter presses are made of metal. In case of rainy days, due to the rapid increase of water molecules in the air and the increase of air hu...
What is the effect of cracks in the plate frame of the box f
By Jinbangtai1. The filtration effect is reduced, resulting in material leakage. 2. Blowing may cause the filter cake to fail to dry, making it more difficult to deal with the filter cake. 3. It will cause the filter plate to expand and crack due to exc...
Damage causes and repair of filter plate of filter press
By JinbangtaiThe damage of the plate itself is caused by: 1. When the sludge is too thick or dry blocks are left, the feed port will be blocked. At this time, there is no medium between the filter plates, only the pressure of the hydraulic system itself...
What is the difference between automatic pulling plate and n
By JinbangtaiAutomatic pulling plate: 1. The filter plate can be automatically opened one by one, cake unloading and labor saving. 2. It is especially suitable for occasions with poor environment. The operators are relatively far away from the site and...
How to maintain the filter press correctly?
By Jinbangtai1. Be familiar with the machine structure and working principle, and the operating parameters shall be controlled within the specified range 2. Make operation records, record and record the operation of the equipment and problems, repair in...